We build multi-spot welding machines for fencing panels, mining meshes, gabions, grates, etc. We match the degree of automation of the process to the specificity of production and customer requirements: from manual loading of rods into templates, to automatic feeders for 2D and 3D meshes, a panel bending press or a collection system and palletizing finished meshes.
Our welding lines are constructed on the basis of welding components from one of the largest European manufacturers of resistance welding machines, TECNA S.p.A. from Italy. We also use the highest quality components from global manufacturers of automation, electronics, optics, pneumatics and servo systems. We provide adequate performance, reliability and the highest quality of welding.We provide adequate performance, reliability and the highest quality of welding.
The multi-spot welder is used for automatic welding of 2D and 3D fencing panels. All bars are fed automatically by 3 feeders with buffer hoppers. The device is also equipped with a palletizing system for finished panels and a rotary table for collecting panels with a forklift during the operation of the machine…
The presented welding machine is used for automatic welding of fencing panels with maximum dimensions of 2500 mm x 2500 mm from rods with diameters from 3 to 8 mm. All bars are fed automatically by 3 feeders: transverse, longitudinal and side for feeding an additional lower transverse bar in 2D panels…
We present an inverter multipoint welder type SW-9/2x240MF for welding meshes – fencing panels and portable construction fences, with interchangeable templates and a palletizing system.
The device consists of the following components…
We present a professional automatic line for the production of welded mesh for fencing panels or gabions. The device is based on 4 inverter 1000Hz transformers with 200kVA power at P-50% and 51 three-chamber welding cylinders with a pressure of 330 kg at 10 bar each…
The multi-point welding machine type SW-18/9×32/AC is designed for automatic welding of steel bar meshes in templates. The machine is built on the basis of 9 double welding modules with an integrated transformer with a power of 32 kVA (P = 50%) and a clamping force of the electrodes 2×260 daN (at 6 bar)…
The presented multi-point welding station type SW-12/2×90/MF was built on the basis of a steel gantry structure with 12 welding actuators installed above the working field. On both sides of the gantry two inverter transformers with a capacity of 90 kVA (P=50%) each were installed…
e device is designed for the production of mesh with a rods thickness of φ3-10mm and a mesh of 20-200mm. The welding station uses 400 kVA (P-50%) DC power units and 15 pneumatic actuators with a down force of 760 daN each. Transverse rods…